Solis S6 10kW Hybrid Solar Inverter – S6-EH1P10K-L-PLUS 21A Single Phase
The Solis S6 10kW Hybrid Inverter is a high-capacity single-phase, low-voltage energy-storage inverter designed for large residential and small commercial solar systems. It supports 40–60V lithium-ion and lead-acid batteries, dual MPPT technology, up to 20kW recommended solar-panel capacity, 210A battery charging and discharging, generator integration, smart-load management and backup switching in less than 10 milliseconds.
₨390,000.00 ₨415,000.00
Solis S6 10kW Hybrid Solar Inverter
The Solis S6-EH1P10K-L-PLUS 10kW Hybrid Inverter is a powerful energy-management solution designed to intelligently coordinate solar panels, battery storage, grid electricity and generator power.
With a rated single-phase output of 10kW, this hybrid inverter is suitable for large homes, offices, shops and small commercial installations that require high solar capacity, dependable battery backup and advanced energy control.
High-Capacity Solar Input
The Solis S6 10kW Hybrid Inverter supports a recommended PV array size of up to 20kW and provides up to 16kW of usable PV input power.
Its two independent MPPT trackers help maximize solar-energy generation from panels installed in different orientations or exposed to varying sunlight conditions.
Each DC input supports up to 21A, making the inverter compatible with modern high-power solar modules. It supports four PV input strings, allowing greater flexibility when designing larger solar arrays.
Low-Voltage Battery Compatibility
The inverter supports 40–60V lithium-ion and lead-acid batteries, providing flexibility when choosing a compatible energy-storage system.
A maximum battery charge and discharge current of 210A enables fast battery charging and strong backup-power delivery.
CAN and RS485 communication interfaces allow supported lithium batteries and battery-management systems to exchange operating information with the inverter.
Fast and Reliable Backup Power
During a grid outage, the Solis S6 10kW Hybrid Inverter can switch from on-grid operation to backup mode in less than 10 milliseconds in a compatible single-inverter installation.
This fast switching helps maintain power to essential equipment with minimal interruption.
The inverter also supports up to 200% of rated backup power for 10 seconds, helping start appliances and equipment with high initial power requirements, such as:
- Air conditioners
- Water pumps
- Refrigerators and freezers
- Motors
- Compressors
- Power tools
- Other high-starting-current loads
10kW Backup Output
The inverter provides up to 10kW rated backup output, making it suitable for properties with higher energy requirements.
Its maximum AC passthrough current of 65A supports substantial electrical loads when power is supplied through the grid or another compatible AC source.
Generator Integration
The Solis S6-EH1P10K-L-PLUS supports multiple generator connection methods and automatic generator control.
Generator power can be managed alongside solar panels, battery storage and grid electricity, providing additional reliability during extended power outages or periods of limited solar generation.
The inverter supports generator input power of up to 10kW.
Smart-Load Management
Smart-load management allows the inverter to control selected appliances according to available solar generation, battery charge level and backup-power requirements.
Users can configure a minimum battery reserve to preserve stored energy for essential loads during grid outages. This can extend backup time and improve overall energy management.
On-Grid and Off-Grid Operation
The Solis S6 10kW Hybrid Inverter supports both grid-connected and off-grid applications.
It can integrate with an existing grid-tied solar inverter for export control and off-grid use. It also supports PV-only off-grid operation in compatible system designs, helping reduce the initial cost where battery installation is planned for a later stage.
Parallel System Expansion
Up to six compatible Solis inverters can operate in parallel, allowing system capacity to be expanded for larger residential and commercial installations.
In a compatible parallel system, the transition from on-grid to off-grid operation can be completed in less than 20 milliseconds.
Smart Monitoring and Control
SolisCloud-compatible monitoring enables users to remotely review and manage important system information, including:
- Solar-energy production
- Battery charge and discharge status
- Grid electricity consumption
- Backup-load usage
- Generator operation
- Inverter status
- System alarms
- Overall energy performance
The monitoring platform also supports remote control, system optimization and troubleshooting features.
Large 7-Inch LCD Display
A 7-inch industrial-grade LCD display provides a clear and user-friendly interface for local system monitoring, configuration and operation.
The inverter supports multiple communication options, including:
- Wi-Fi
- LAN
- Bluetooth
- CAN-BMS
- CAN parallel communication
- RS485 meter communication
- Standard RS485
- Optional 4G connectivity
Durable IP66 Protection
The inverter features an IP66-rated enclosure, providing protection against dust and water for installation in demanding environmental conditions.
It supports operating temperatures from approximately -25°C to 60°C and can operate at altitudes of up to 3,000 metres.
Intelligent redundant fan cooling helps manage operating temperature during high-power use.
Key Features
- 10kW rated single-phase AC output
- 10kW rated backup output
- 40–60V low-voltage battery support
- Compatible with lithium-ion and lead-acid batteries
- Maximum 210A battery charging current
- Maximum 210A battery discharging current
- Two independent MPPT trackers
- Four PV input strings
- Maximum 21A current per DC input
- Maximum combined PV input current of 42A per MPPT
- Recommended PV array capacity up to 20kW
- Maximum usable PV input power of 16kW
- Maximum PV input voltage of 500V
- Up to 200% backup overload capacity for 10 seconds
- Backup switching time below 10 milliseconds
- Maximum AC passthrough current of 65A
- Generator input support up to 10kW
- Automatic generator control
- Smart-load management
- Configurable battery backup reserve
- Grid-tied inverter integration
- Export-power control
- PV-only off-grid operation
- Parallel operation of up to six compatible inverters
- SolisCloud smart monitoring and remote control
- 7-inch industrial-grade LCD display
- Wi-Fi, LAN and Bluetooth connectivity
- CAN and RS485 communication
- IP66 weather-resistant enclosure
- Optional AFCI 2.0 arc-fault protection
Technical Specifications
| Specification | Details |
|---|---|
| Model | S6-EH1P10K-L-PLUS 21A |
| Inverter type | Single-phase low-voltage hybrid inverter |
| Rated AC output power | 10kW |
| Maximum apparent output power | 10kVA |
| Rated grid voltage | 220V / 230V |
| Rated grid frequency | 50Hz / 60Hz |
| Rated grid output current | 45.5A at 220V / 43.5A at 230V |
| Recommended maximum PV array | Up to 20kW |
| Maximum usable PV input power | 16kW |
| Maximum PV input voltage | 500V |
| Rated PV voltage | 330V |
| PV start-up voltage | 90V |
| MPPT voltage range | 90–435V |
| Number of MPPT trackers | 2 |
| Maximum PV input strings | 4 |
| Maximum PV input current | 42A / 42A |
| Maximum current per DC input | 21A |
| Maximum short-circuit current | 48A / 48A |
| Supported battery types | Lithium-ion / Lead-acid |
| Battery voltage range | 40–60V |
| Maximum battery charge current | 210A |
| Maximum battery discharge current | 210A |
| Battery ports | 1 |
| BMS ports | 1 |
| Battery communication | CAN / RS485 |
| Rated backup output | 10kW |
| Backup overload capacity | Up to 200% for 10 seconds |
| Single-inverter backup switching | Less than 10ms |
| Maximum AC passthrough current | 65A |
| Maximum generator input power | 10kW |
| Generator rated current | 45.5A at 220V / 43.5A at 230V |
| Maximum efficiency | Up to 96.2% |
| European efficiency | Up to 96.1% |
| Maximum PV-to-battery efficiency | Up to 95.3% |
| Maximum AC-to-battery efficiency | Up to 93.9% |
| Battery discharge efficiency | Up to 93.8% |
| Dimensions | Approximately 335 × 560 × 253mm |
| Weight | Approximately 23.8kg |
| Operating temperature | Approximately -25°C to 60°C |
| Relative humidity | 0–100% |
| Ingress protection | IP66 |
| Cooling method | Intelligent redundant fan cooling |
| Typical noise level | Below 65dB(A) |
| Maximum operating altitude | Up to 3,000m |
| Display | 7-inch LCD with Bluetooth and app support |
| Standard communication | Wi-Fi, LAN, Bluetooth, CAN and RS485 |
| Optional communication | 4G |
Protection Features
- Surge protection
- Output overcurrent protection
- Insulation-resistance monitoring
- Residual-current detection
- Anti-islanding protection
- Integrated PV DC switch
- PV reverse-polarity protection
- Overvoltage protection
- Optional AFCI 2.0 arc-fault protection
Based on 0 reviews
Be the first to review “Solis S6 10kW Hybrid Solar Inverter – S6-EH1P10K-L-PLUS 21A Single Phase”
You must be logged in to post a review.
Purchased it? Share your experience.
No account needed. Find your purchase and choose an available verification method.
Related products
-
Hybrid Inverters
Solis S6 6kW Hybrid Solar Inverter – S6-EH1P6K-L-PLUS Single Phase
The Solis S6 6kW Hybrid Inverter is a high-performance single-phase solar inverter designed for residential and small commercial energy-storage systems. It supports low-voltage 40–60V lithium-ion and lead-acid batteries, dual MPPT technology, up to 135A battery charging and discharging, generator integration, smart-load management and backup switching in less than 10 milliseconds.
SKU: n/a -
Hybrid Inverters
Luminey Elecra PV4000 3kW Hybrid Solar Inverter – 24V Single Phase
The Luminey Elecra PV4000 3kW Hybrid Inverter is a compact single-phase solar inverter designed for homes, offices, and small shops. It delivers pure sine-wave output, supports up to 4000W of solar panels, uses a 24V battery system, and features MPPT solar charging, dual-output power management, fast transfer time, and smart connectivity.
SKU: n/a -
Hybrid Inverters
Luminey Elecra PV5600 4kW Hybrid Solar Inverter – 24V Single Phase
The Luminey Elecra PV5600 4kW Hybrid Inverter provides reliable solar and backup power for homes, shops, and offices. It features a 4000W pure sine-wave output, up to 5600W solar-panel capacity, 24V battery support, 120A maximum charging, MPPT technology, built-in Wi-Fi, smart monitoring, and dual-output load management.
SKU: n/a -
Hybrid Inverters
Solis S6 8kW Hybrid Solar Inverter – S6-EH1P8K-L-PLUS Single Phase
The Solis S6 8kW Hybrid Inverter is a powerful single-phase, low-voltage energy-storage inverter designed for residential and small commercial solar systems. It supports 40–60V lithium-ion and lead-acid batteries, dual MPPT technology, up to 16kW recommended PV capacity, 190A battery charging and discharging, generator integration, smart-load management, and backup switching in less than 10 milliseconds.
SKU: n/a
There are no reviews yet.