SAJ H2 10kW Three-Phase Hybrid Solar Inverter – H2-10K-LT2-LV
The SAJ H2 10kW Hybrid Inverter is a powerful three-phase, low-voltage energy-storage inverter for large residential and commercial solar systems. It supports up to 20kW of recommended PV capacity, 250A battery charging and discharging, three PV strings across two MPPT trackers, generator integration, smart-load management, 63A bypass, and fast backup switching below 10 milliseconds.
₨345,000.00 ₨375,000.00
SAJ H2 10kW Low-Voltage Hybrid Solar Inverter
The SAJ H2-10K-LT2-LV 10kW Hybrid Inverter combines solar generation, low-voltage battery storage, grid electricity, generator input, and smart-load control in one advanced energy system.
Its high output, 250A battery capability, and expandable design make it suitable for large homes, offices, retail locations, workshops, and small commercial applications.
High-Capacity 20kW Solar Input
The inverter supports a recommended PV array capacity of up to 20kW, with maximum usable PV input power of 16kW.
Two MPPT trackers and three PV string inputs provide flexibility for larger solar arrays. One MPPT supports two strings while the second supports one string.
Powerful 250A Battery Performance
The SAJ H2 10kW supports 40–60V LiFePO4 and lead-acid batteries.
A maximum charging and discharging current of 250A enables rapid charging of large battery banks and strong power delivery during backup operation.
Reliable 10kW Backup Output
The inverter provides up to 10kVA backup output and can supply twice its rated output for 10 seconds to start demanding appliances and motor-based loads.
Backup switching takes less than 10 milliseconds, helping keep important equipment running during grid interruptions.
Complete Energy Integration
The intelligent energy-management platform supports:
- Solar panels
- Multiple parallel batteries
- Grid electricity
- Diesel or petrol generators
- Heat pumps
- Smart loads
- Whole-home backup systems
- On-grid and off-grid operation
Parallel Expansion
Up to 10 H2-LT2 units can operate in parallel, allowing the system to be expanded for larger projects and increasing electricity requirements.
Advanced Protection
The inverter includes protection against reverse polarity, overcurrent, overvoltage, overheating, short circuits, ground faults, residual current, islanding, and insulation faults. Optional arc-fault protection may also be supported.
Outdoor-Ready Construction
Its IP66 enclosure, smart cooling system, and operating range from approximately -30°C to 65°C make it suitable for demanding installation environments.
Key Features
- 10kW rated three-phase output
- Maximum 11kVA apparent output
- Recommended PV array capacity up to 20kW
- Maximum usable PV input power of 16kW
- Maximum PV input voltage of 1000V
- MPPT operating range of 160–950V
- Two MPPT trackers
- Three PV string inputs
- Maximum PV input current of 40A / 20A
- 40–60V battery support
- LiFePO4 and lead-acid compatibility
- Maximum 250A battery charging and discharging
- Two battery inputs
- 63A AC bypass
- 10kVA backup output
- Backup switching below 10ms
- 200% peak off-grid output for 10 seconds
- Generator and smart-load integration
- Heat-pump support
- Up to 10 parallel inverters
- Maximum efficiency up to 98%
- Comprehensive integrated protection
- IP66 weather-resistant enclosure
- LCD and LED interface
- CAN and RS485 communication
Technical Specifications
| Specification | Details |
|---|---|
| Model | H2-10K-LT2-LV |
| Inverter type | Three-phase low-voltage hybrid inverter |
| Rated AC output | 10kW |
| Maximum apparent output | 11kVA |
| Rated output voltage | 127/220V |
| Rated output current | 26.2A |
| Maximum output current | 28.9A |
| Maximum PV array | 20kW |
| Maximum usable PV input | 16kW |
| Maximum PV voltage | 1000V |
| MPPT voltage range | 160–950V |
| Start-up voltage | 150V |
| Number of MPPT trackers | 2 |
| Strings per MPPT | 2 + 1 |
| Maximum PV input current | 40A / 20A |
| Maximum short-circuit current | 50A / 25A |
| Battery type | LiFePO4 or lead-acid |
| Battery voltage range | 40–60V |
| Maximum battery current | 250A |
| Battery inputs | 2 |
| Backup output | 10kVA |
| Maximum backup current | 26.2A |
| Backup switching time | Less than 10ms |
| Peak off-grid output | 200% for 10 seconds |
| Bypass current | 63A |
| Maximum efficiency | 98% |
| European efficiency | 97.5% |
| Protection rating | IP66 |
| Operating temperature | -30°C to 65°C |
| Noise level | Less than 45dB |
| Dimensions | 470 × 740 × 270mm |
| Weight | Approximately 53kg |
| Communication | CAN, RS485; optional Wi-Fi, LAN, and 4G |
Based on 0 reviews
Be the first to review “SAJ H2 10kW Three-Phase Hybrid Solar Inverter – H2-10K-LT2-LV”
You must be logged in to post a review.
Purchased it? Share your experience.
No account needed. Find your purchase and choose an available verification method.
Related products
-
Hybrid Inverters
SAJ H2 8kW Three-Phase Hybrid Solar Inverter – H2-8K-LT2-LV
The SAJ H2 8kW Hybrid Inverter is a high-performance three-phase inverter for solar and battery-storage systems. It supports up to 16kW of recommended PV capacity, 40–60V LiFePO4 and lead-acid batteries, 210A battery charging and discharging, dual MPPT technology, generator access, smart loads, whole-home backup, and switching in under 10 milliseconds.
SKU: n/a -
Hybrid Inverters
Luminey Elecra PV8000 6kW Hybrid Solar Inverter – 48V Single Phase
The Luminey Elecra PV8000 6.2kW Hybrid Inverter is a powerful single-phase solar and battery-storage solution with up to 8000W PV input, 48V battery support, 120A charging, grid-tied and off-grid operation, dual output, built-in Wi-Fi, battery-management communication, zero-export functionality, and parallel expansion of up to nine units.
SKU: n/a -
Hybrid Inverters
Solis S6 8kW Hybrid Solar Inverter – S6-EH1P8K-L-PLUS Single Phase
The Solis S6 8kW Hybrid Inverter is a powerful single-phase, low-voltage energy-storage inverter designed for residential and small commercial solar systems. It supports 40–60V lithium-ion and lead-acid batteries, dual MPPT technology, up to 16kW recommended PV capacity, 190A battery charging and discharging, generator integration, smart-load management, and backup switching in less than 10 milliseconds.
SKU: n/a -
Hybrid Inverters
Luminey Elecra PV5600 4kW Hybrid Solar Inverter – 24V Single Phase
The Luminey Elecra PV5600 4kW Hybrid Inverter provides reliable solar and backup power for homes, shops, and offices. It features a 4000W pure sine-wave output, up to 5600W solar-panel capacity, 24V battery support, 120A maximum charging, MPPT technology, built-in Wi-Fi, smart monitoring, and dual-output load management.
SKU: n/a
There are no reviews yet.